86 13777716892
HOME >> ACCESSORIES >> KS-02 90-Degree Push-In Pneumatic Tube Elbow Connector
  • KS-02 90-Degree Push-In Pneumatic Tube Elbow Connector
    ❤ Add to collection

  • KS-02 90-Degree Push-In Pneumatic Tube Elbow Connector

    A compact 90-degree push-in pneumatic elbow for joining two compatible air tubes while changing line direction. The KS-02 uses release collets at both ends for fast installation in spray-gun air systems, compressors, workshop machinery and light automation equipment.

    • Satisfaction：

      Sales： 0

      Review： 0

    Weight：0.000KG
    • Quantity：
    • Consult
Description
A compact 90-degree push-in pneumatic elbow for joining two compatible air tubes while changing line direction. The KS-02 uses release collets at both ends for fast installation in spray-gun air systems, compressors, workshop machinery and light automation equipment.

KS-02 90-Degree Push-In Pneumatic Tube Elbow

The KS-02 is a tube-to-tube right-angle connector for compressed-air systems. Its push-to-connect ports allow compatible pneumatic tubing to be installed quickly while the elbow body supports neat routing around equipment and confined spaces.

Product Attributes

AttributeDetails
1. ModelKS-02
2. Product typePush-in pneumatic elbow connector
3. Connection layoutTube to tube
4. Angle90 degrees
5. Port quantity2 push-in ports
6. Tube sizeConfirm compatible outside diameter
7. Body materialEngineering polymer with metal retaining components
8. Body colorBlack
9. Release ringsBlack push collets
10. Body shapeCompact right-angle elbow
11. Service mediumCompressed air
12. Main functionChange pneumatic tube direction by 90 degrees
13. Tube connectionPush-to-connect at both ends
14. Tube releasePress collet and pull tube after depressurizing
15. Spray gun useSuitable for compatible spray-gun air tubing
16. Compressor useSuitable for compressor and manifold tubing
17. Regulator useSuitable for pneumatic filters and control lines
18. Industrial useLight automation and maintenance systems
19. Automotive useBody-shop and workshop pneumatic installations
20. Tube materialUse compatible PU, PE or nylon tubing
21. Working pressureConfirm rating for fitting and tubing
22. Temperature rangeDepends on seals, tubing and environment
23. AirflowDepends on tube bore and operating pressure
24. Seal typeInternal push-fitting seals
25. Thread requirementNo threaded connection required
26. Installation toolNo wrench normally required
27. Tube preparationCut squarely and remove burrs
28. Tube insertionPush each tube fully to the internal stop
29. Routing benefitSupports compact 90-degree hose routing
30. Space benefitUseful in confined installations
31. Maintenance benefitTubes can be released and replaced quickly
32. ReusabilityReusable while collets and seals remain serviceable
33. Leak preventionUse correct tube size and full insertion
34. InspectionCheck both collets, seals and tube ends
35. CleaningKeep ports free from paint, dust and debris
36. SafetyRelease pressure before tube removal
37. Handling cautionAvoid excessive side load on either tube
38. Damage warningReplace if cracked, loose or leaking
39. StorageStore clean and dry
40. PackagingBulk or retail packaging available
41. OEM serviceCustom tube size and packaging may be available
42. Package contents1 x KS-02 push-in elbow connector

Installation Guidance

  1. Depressurize the pneumatic system.

  2. Confirm both tubes have the correct outside diameter.

  3. Cut each tube squarely and push it fully into the fitting.

  4. Restore pressure gradually and inspect both ports for leaks.

  • User name Member Level Quantity Specification Purchase Date
    • Total 0 Record
  • Satisfaction ：
No evaluation information
按钮文本