Compact 150 mm Air Dual-Action Sander

Built for efficient surface preparation, this compact pneumatic sander uses random orbital movement to help produce a consistent finish while reducing visible sanding marks. Its low-profile blue composite body, polished metal paddle and red backing pad are designed for comfortable workshop operation.

Product Attributes

1. Product category: Air-powered finishing sander

2. Tool format: Compact palm sander

3. Drive system: Pneumatic motor

4. Sanding action: Dual-action random orbit

5. Backing pad size: 150 mm / 6-inch class

6. Backing pad shape: Round

7. Disc fixing: Hook-and-loop fastening

8. Pad surface: Textile loop interface

9. Top shell color: Blue

10. Lower shell color: Black

11. Pad color: Red

12. Body construction: Lightweight molded composite

13. Trigger construction: Polished metal paddle

14. Trigger location: Top center

15. Activation style: Press-to-run lever

16. Speed adjustment: Manual air regulator knob

17. Air connection: Rear-mounted inlet assembly

18. Exhaust location: Side outlet

19. Exhaust accessory: Integrated muffler/silencer

20. Dust extraction: Standard non-vacuum layout

21. Grip configuration: One-hand palm grip

22. Body profile: Low-height ergonomic design

23. Contact control: Broad grip supports even downward pressure

24. Mobility: Suitable for bench, vehicle and on-site work

25. Main application: Automotive paint preparation

26. Primer use: Leveling cured primer

27. Filler use: Smoothing body filler

28. Clearcoat use: Surface keying before refinishing

29. Wood use: Furniture, panels and cabinet preparation

30. Metal use: Deburring and coating preparation

31. Composite use: Fiberglass and molded-part finishing

32. Repair use: Spot repair and blend-area preparation

33. Finish result: Uniform scratch pattern

34. Mark reduction: Random orbit helps reduce swirl visibility

35. Abrasive type: Hook-and-loop sanding discs

36. Abrasive range: Compatible with task-appropriate coarse, medium, fine and ultra-fine grits

37. Typical operating pressure: About 90 PSI / 6.2 bar for many air sanders; verify final specification

38. Air quality: Clean, dry and regulated air recommended

39. Hose use: Connect through a suitable workshop air hose

40. Lubrication: Apply pneumatic tool oil as required

41. Compressor pairing: Match compressor output to confirmed air-consumption data

42. Service access: External fasteners allow routine inspection

43. Pad replacement: Backing pad can be serviced when worn

44. Daily care: Remove dust and check the air fitting after use

45. Operator protection: Eye, hearing and breathing protection recommended

46. Workpiece protection: Test speed and abrasive on a small area first

47. Storage method: Keep clean, dry and disconnected from the air supply

48. Target users: Body shops, furniture makers, fabricators and maintenance teams

49. Customization: Color, branding, labels and cartons can be customized

50. Bulk supply: Suitable for OEM, wholesale and distributor orders

51. Pre-order confirmation: Confirm orbit, RPM, air inlet thread, pad density and package contents

Typical Uses

• Automotive primer and filler sanding

• Furniture and cabinet surface preparation

• Metal finishing before paint or powder coating

• Fiberglass repair and composite smoothing

• General workshop deburring and finishing