6-Inch Pneumatic Random Orbital Palm Sander

This compact air sander combines random orbital action with a comfortable palm-grip body for controlled sanding on paint, primer, wood, metal and composite surfaces. The illustrated blue-and-black housing includes a metal throttle lever, adjustable air control, muffled exhaust and a red hook-and-loop backing pad.

Product Attributes

1. Product type: Pneumatic random orbital palm sander

2. Power source: Compressed air

3. Operating motion: Random orbital / dual-action sanding

4. Pad class: 6-inch / 150 mm round pad configuration

5. Pad shape: Circular

6. Pad color: Red/orange

7. Abrasive attachment: Hook-and-loop interface

8. Main housing color: Blue

9. Lower housing color: Black

10. Housing material: Lightweight composite construction

11. Throttle lever material: Metal

12. Pad shroud material: Molded polymer

13. Base plate construction: Reinforced backing assembly

14. Control method: Hand-operated paddle trigger

15. Trigger style: Top-mounted safety lever

16. Speed control: Adjustable air-flow dial

17. Air inlet position: Rear/side inlet

18. Exhaust arrangement: Side exhaust

19. Noise treatment: Integrated exhaust muffler

20. Vacuum style: Non-vacuum standard configuration

21. Grip type: Palm grip

22. Grip profile: Rounded low-profile body

23. Handling: Suitable for one-hand operation

24. Balance: Low center of gravity for stable contact

25. Primary use: Automotive body refinishing

26. Secondary use: Furniture and woodworking finishing

27. Metal application: Surface preparation before coating

28. Paint application: Paint and clearcoat feather-edging

29. Primer application: Primer leveling and pre-paint sanding

30. Rust application: Light oxidation and rust removal

31. Composite application: Fiberglass and filler smoothing

32. Finish characteristic: Smooth, swirl-reduced sanding pattern

33. Edge control: Rounded pad supports controlled contour work

34. Abrasive compatibility: Hook-and-loop sanding discs

35. Typical grit range: Coarse through ultra-fine discs, depending on task

36. Typical shop pressure: Commonly used around 90 PSI / 6.2 bar; confirm final model specification

37. Air fitting: Compatible with common workshop air-line fittings; thread can be confirmed per order

38. Lubrication: Use approved pneumatic tool oil unless operated with a lubricator

39. Compressor requirement: Clean, dry and regulated compressed-air supply

40. Work environment: Body shop, workshop, factory and maintenance area

41. Maintenance: Keep air inlet clean and inspect pad condition regularly

42. Vibration control: Balanced orbital action helps improve handling comfort

43. Noise control: Muffled outlet helps reduce exhaust harshness

44. Safety recommendation: Wear eye, hearing and respiratory protection

45. Dust recommendation: Use suitable extraction or local dust collection

46. Operator skill level: Professional, industrial and experienced DIY use

47. Storage: Store dry, depressurized and away from corrosive materials

48. OEM service: Housing color, logo and packaging customization available

49. Private label: Supported for distributors and tool brands

50. Quality check: Air leakage, trigger action and pad rotation should be inspected before shipment

51. Ordering note: Confirm pad size, orbit, free speed, air consumption and inlet thread before bulk production

Key Benefits

• Compact palm-grip form for controlled surface contact

• Adjustable air control for different sanding stages

• Hook-and-loop pad for quick abrasive changes

• Random orbital action for a smoother finishing pattern

• Suitable for automotive, wood, metal and composite work