| Attribute | Details |
|---|
| 1. Model | WD-750SLL |
| 2. Product type | Metal siphon-feed spray-gun cup |
| 3. Nominal capacity | Approximately 750 ml; confirm production specification |
| 4. Main material | Metal |
| 5. Surface finish | Polished silver-colored finish |
| 6. Body shape | Wide cylindrical reservoir with shoulder |
| 7. Feed configuration | Siphon feed |
| 8. Connector position | Top center |
| 9. Connection style | Top fluid connector |
| 10. Connection specification | Confirm exact thread and fit before ordering |
| 11. Lid type | Removable metal lid |
| 12. Lid grip | Knurled perimeter for hand tightening |
| 13. Vent feature | Small lid vents as shown |
| 14. Body color | Silver |
| 15. Visibility | Opaque metal body |
| 16. Primary application | Holding paint and compatible coatings |
| 17. Spray-gun type | Compatible siphon-feed or suction-feed spray guns |
| 18. Automotive use | Vehicle body refinishing and repair |
| 19. Furniture use | Furniture, cabinet and wood finishing |
| 20. Industrial use | Production and maintenance coating |
| 21. Capacity class | Large cup |
| 22. Refill benefit | Reduces refill frequency during long jobs |
| 23. Stability benefit | Wide body supports balanced handling |
| 24. Lid benefit | Knurled edge supports quick removal |
| 25. Installation method | Attach to compatible spray-gun pickup connection |
| 26. Tube requirement | Use specified internal pickup tube where applicable |
| 27. Seal requirement | Use correct lid gasket and connector seal |
| 28. Leak prevention | Keep lid, vent and connector surfaces clean |
| 29. Cleaning method | Flush with approved coating cleaner |
| 30. Solvent compatibility | Confirm with coating and cleaning system |
| 31. Water-based coating use | Subject to confirmed material compatibility |
| 32. Solvent-based coating use | Subject to confirmed material compatibility |
| 33. Reusability | Reusable with proper cleaning and care |
| 34. Inspection | Check cup, lid, vents, pickup and connector |
| 35. Maintenance | Remove dried coating from fluid passages |
| 36. Safety | Disconnect air and release pressure before removal |
| 37. Filling caution | Do not overfill or block vent openings |
| 38. Handling caution | Avoid impact, dents and overtightening |
| 39. Storage | Store clean, dry and protected from impact |
| 40. Packaging | Bulk or retail packaging available |
| 41. OEM service | Custom finish, marking and packaging may be available |
| 42. Package contents | 1 x WD-750SLL metal siphon cup assembly |
