| Attribute | Details |
|---|
| 1. Model | WD-600GPW |
| 2. Product type | Plastic gravity-feed spray-gun cup |
| 3. Nominal capacity | Approximately 600 ml; confirm specification |
| 4. Main material | Translucent molded plastic |
| 5. Body color | White/translucent |
| 6. Body shape | Cylindrical body with tapered lower section |
| 7. Feed direction | Gravity feed |
| 8. Outlet position | Bottom center |
| 9. Connection style | Lower fitted or threaded connector |
| 10. Connection specification | Confirm exact thread or fitting before ordering |
| 11. Lid type | Wide screw-style plastic lid |
| 12. Lid grip | Ribbed perimeter |
| 13. Vent feature | Tethered vent cap |
| 14. Visibility | Translucent body helps monitor paint level |
| 15. Primary application | Holding paint and compatible coatings |
| 16. Spray-gun type | Compatible full-size gravity-feed spray guns |
| 17. Automotive use | Vehicle panel and body refinishing |
| 18. Furniture use | Furniture, cabinet and wood finishing |
| 19. Industrial use | Component coating and maintenance work |
| 20. Workshop use | Professional and advanced DIY spraying |
| 21. Capacity class | Large cup |
| 22. Weight benefit | Lightweight compared with many metal cups |
| 23. Level-check benefit | Visible level supports refill planning |
| 24. Filling benefit | Wide opening simplifies loading |
| 25. Venting benefit | Tether helps keep vent cap attached |
| 26. Installation method | Attach to compatible spray-gun fluid inlet |
| 27. Seal requirement | Use specified gasket or sealing component |
| 28. Leak prevention | Keep lid, outlet and seal surfaces clean |
| 29. Cleaning method | Use cleaner approved for plastic and coating |
| 30. Solvent compatibility | Confirm before using aggressive thinner |
| 31. Water-based coating use | Subject to confirmed material compatibility |
| 32. Solvent-based coating use | Subject to confirmed plastic compatibility |
| 33. Reusability | Reusable when undamaged and properly cleaned |
| 34. Inspection | Check cup, lid, tether, vent and connector |
| 35. Maintenance | Remove dried coating from outlet and lid |
| 36. Safety | Disconnect air and empty cup before removal |
| 37. Filling caution | Do not overfill or block venting |
| 38. Heat caution | Keep away from flame and hot surfaces |
| 39. Storage | Store clean, dry and out of direct sunlight |
| 40. Packaging | Bulk or retail packaging available |
| 41. OEM service | Custom color, logo and packaging may be available |
| 42. Package contents | 1 x WD-600GPW plastic cup with lid |
