| Attribute | Details |
|---|
| 1. Model | WD-600GPP |
| 2. Product type | Plastic gravity-feed spray-gun cup |
| 3. Nominal capacity | Approximately 600 ml; confirm production specification |
| 4. Main material | Translucent molded plastic |
| 5. Body color | White/translucent |
| 6. Body shape | Cylindrical body with tapered bottom |
| 7. Feed direction | Gravity feed |
| 8. Outlet position | Bottom center |
| 9. Connection style | Lower metal connector |
| 10. Connection specification | Confirm exact thread or fitting before ordering |
| 11. Lid type | Wide screw-style plastic lid |
| 12. Lid grip | Ribbed edge for hand tightening |
| 13. Vent feature | Raised center vent as shown |
| 14. Visibility | Translucent body helps monitor coating level |
| 15. Primary application | Holding paint and compatible coatings |
| 16. Spray-gun type | Compatible full-size gravity-feed spray guns |
| 17. Automotive use | Vehicle panel refinishing and repair |
| 18. Furniture use | Furniture, cabinet and wood finishing |
| 19. Industrial use | Component coating and maintenance applications |
| 20. Workshop use | Professional and DIY spray painting |
| 21. Capacity class | Large cup |
| 22. Weight benefit | Lightweight for full-size gun handling |
| 23. Level-check benefit | Visible paint level supports workflow planning |
| 24. Filling benefit | Wide top opening simplifies coating loading |
| 25. Installation method | Attach to compatible spray-gun fluid inlet |
| 26. Seal requirement | Use specified gasket or sealing component |
| 27. Leak prevention | Keep lid, outlet and sealing surfaces clean |
| 28. Cleaning method | Use approved cleaner compatible with the plastic |
| 29. Solvent compatibility | Confirm before using aggressive thinner |
| 30. Water-based coating use | Subject to confirmed material compatibility |
| 31. Solvent-based coating use | Subject to confirmed plastic compatibility |
| 32. Reusability | Reusable when undamaged and properly cleaned |
| 33. Inspection | Check cup body, lid, vent and connector |
| 34. Maintenance | Remove dried paint from lid and outlet |
| 35. Safety | Disconnect air and empty the cup before removal |
| 36. Filling caution | Do not overfill or obstruct venting |
| 37. Heat caution | Keep away from flame and hot surfaces |
| 38. Damage warning | Replace if cracked, deformed or leaking |
| 39. Storage | Store clean, dry and away from direct sunlight |
| 40. Packaging | Bulk or retail packaging available |
| 41. OEM service | Custom color, logo and packaging may be available |
| 42. Package contents | 1 x WD-600GPP plastic cup with lid |
