| Attribute | Details |
|---|
| 1. Model | WD-125GPZ |
| 2. Product type | Plastic gravity-feed spray-gun cup |
| 3. Nominal capacity | Approximately 125 ml; confirm specification |
| 4. Main material | Translucent molded plastic |
| 5. Body color | White/translucent |
| 6. Cup shape | Cylindrical upper body with tapered bottom |
| 7. Feed direction | Gravity feed |
| 8. Outlet position | Bottom center |
| 9. Connection style | Lower threaded or fitted outlet |
| 10. Thread specification | Confirm exact size and pitch before ordering |
| 11. Lid type | Wide screw-style plastic lid |
| 12. Lid grip | Ribbed perimeter for hand tightening |
| 13. Visibility | Translucent body helps monitor paint level |
| 14. Primary application | Holding paint and compatible coatings |
| 15. Spray-gun type | Compatible gravity-feed touch-up guns |
| 16. Automotive use | Spot repair and small-panel refinishing |
| 17. Furniture use | Cabinet, furniture and wood touch-up |
| 18. Industrial use | Small-part coating and maintenance work |
| 19. Hobby use | Craft, model and DIY spraying |
| 20. Capacity class | Small-volume cup |
| 21. Handling benefit | Lightweight for precise gun movement |
| 22. Level-check benefit | Visible coating level supports refill planning |
| 23. Filling access | Wide top opening |
| 24. Refill suitability | Useful for short jobs and color changes |
| 25. Installation method | Attach to a compatible spray-gun fluid inlet |
| 26. Seal requirement | Use specified gasket or seal |
| 27. Leak prevention | Keep lid, outlet and sealing faces clean |
| 28. Cleaning method | Use approved cleaner compatible with the plastic |
| 29. Solvent compatibility | Confirm before using aggressive thinners |
| 30. Water-based coating use | Subject to confirmed material compatibility |
| 31. Solvent-based coating use | Subject to confirmed plastic compatibility |
| 32. Reusability | Reusable when undamaged and properly cleaned |
| 33. Inspection | Check for cracks, clouding and thread wear |
| 34. Maintenance | Remove dried paint from lid and outlet |
| 35. Safety | Disconnect air and empty cup before removal |
| 36. Filling caution | Do not overfill or block lid venting |
| 37. Heat caution | Keep away from hot surfaces and flame |
| 38. Storage | Store clean, dry and out of direct sunlight |
| 39. Packaging | Bulk or retail packaging available |
| 40. OEM service | Custom color, logo and packaging may be available |
| 41. Compatibility note | Confirm gun model, connection and seal |
| 42. Package contents | 1 x WD-125GPZ plastic cup with lid |
