| Attribute | Details |
|---|
| 1. Model | WD-125GLL |
| 2. Product type | Gravity-feed spray-gun paint cup |
| 3. Nominal capacity | Approximately 125 ml; confirm production specification |
| 4. Main material | Metal |
| 5. Surface finish | Polished silver-colored finish |
| 6. Cup shape | Cylindrical body with rounded bottom |
| 7. Feed direction | Gravity feed |
| 8. Outlet position | Bottom center |
| 9. Connection style | Threaded lower outlet |
| 10. Thread specification | Confirm exact size and pitch before ordering |
| 11. Lid style | Metal top flange/lid configuration as shown |
| 12. Color | Silver |
| 13. Visibility | Opaque metal body |
| 14. Primary application | Holding paint or compatible coating material |
| 15. Spray-gun type | Compatible gravity-feed touch-up or detail guns |
| 16. Automotive use | Spot repair, trim and small-panel refinishing |
| 17. Furniture use | Cabinet, wood and furniture touch-up |
| 18. Industrial use | Small-part coating and maintenance painting |
| 19. Hobby use | Craft, model and DIY spray projects |
| 20. Coating types | Primer, basecoat, clear coat and compatible finishes |
| 21. Capacity class | Small-volume cup |
| 22. Handling benefit | Low paint load supports precise tool control |
| 23. Refill frequency | Suitable for short jobs and frequent color changes |
| 24. Portability | Compact and lightweight relative to larger cups |
| 25. Installation method | Thread onto a compatible spray-gun fluid inlet |
| 26. Seal requirement | Use the specified gasket or seal |
| 27. Leak prevention | Keep thread and sealing faces clean and undamaged |
| 28. Cleaning method | Flush and wipe with an approved coating cleaner |
| 29. Solvent compatibility | Confirm with coating and cleaning chemical |
| 30. Water-based coating use | Subject to confirmed material compatibility |
| 31. Solvent-based coating use | Subject to confirmed material compatibility |
| 32. Reusability | Reusable with proper cleaning and care |
| 33. Inspection | Check dents, thread damage and leakage before use |
| 34. Maintenance | Remove dried coating from outlet and rim |
| 35. Safety | Disconnect air and empty the cup before removal |
| 36. Filling caution | Do not overfill; leave suitable headspace |
| 37. Handling caution | Avoid dropping or deforming the cup body |
| 38. Storage | Store clean, dry and protected from impact |
| 39. Packaging | Bulk or retail packaging according to order |
| 40. OEM service | Custom finish, marking and packaging may be available |
| 41. Compatibility note | Confirm gun model, thread and seal before purchase |
| 42. Package contents | 1 x WD-125GLL metal paint cup |
