| Attribute | Details |
|---|
| 1. Model | KS-07 |
| 2. Product type | Push-in pneumatic Y splitter |
| 3. Connection layout | Tube to two branch tubes |
| 4. Port quantity | 3 push-in ports |
| 5. Body shape | Compact Y configuration |
| 6. Thread requirement | No threaded connection |
| 7. Tube size | Confirm compatible outside diameter |
| 8. Main material | Engineering polymer with metal retaining parts |
| 9. Body color | Black |
| 10. Release rings | Push collets with silver-colored retainers |
| 11. Service medium | Compressed air |
| 12. Main function | Split one tube line into two branches |
| 13. Tube connection | Push-to-connect at all ports |
| 14. Tube release | Press collet and pull tube after depressurizing |
| 15. Spray gun use | Suitable for compatible spray-gun air tubing |
| 16. Compressor use | Suitable for compressor and manifold tubing |
| 17. Regulator use | Suitable for pneumatic control and filter lines |
| 18. Industrial use | Light automation and maintenance systems |
| 19. Automotive use | Body-shop and garage air-line branching |
| 20. Furniture use | Spray-finishing workshop air systems |
| 21. Compatible tubing | PU, PE or nylon pneumatic tubing |
| 22. Working pressure | Confirm fitting and tube pressure ratings |
| 23. Temperature range | Depends on tubing, seals and environment |
| 24. Airflow | Shared according to tube bore and active branches |
| 25. Pressure behavior | Flow and pressure may reduce with both branches active |
| 26. Seal type | Internal push-fitting seals |
| 27. Installation tool | No wrench normally required |
| 28. Tube preparation | Cut tube ends squarely and remove burrs |
| 29. Tube insertion | Push each tube fully to the internal stop |
| 30. Branching benefit | Creates two pneumatic paths from one line |
| 31. Space benefit | Compact for restricted routing areas |
| 32. Maintenance benefit | Each tube can be released individually |
| 33. Reusability | Reusable while collets and seals remain serviceable |
| 34. Leak prevention | Use the correct tube size and full insertion |
| 35. Inspection | Check all collets, seals and tube ends |
| 36. Cleaning | Keep ports free from paint, dust and debris |
| 37. Safety | Depressurize fully before tube removal |
| 38. Handling caution | Avoid excessive side load on any branch |
| 39. Damage warning | Replace if cracked, loose or leaking |
| 40. Storage | Store clean and dry |
| 41. Packaging | Bulk or retail packaging available |
| 42. OEM service | Custom tube sizes and packaging may be available |
| 43. Color option | Standard black; alternatives subject to order |
| 44. User level | Suitable for professional and workshop installation |
| 45. Package contents | 1 x KS-07 three-port Y splitter |
