| Attribute | Details |
|---|
| 1. Model | KS-06 |
| 2. Product type | Male-thread pneumatic Y splitter |
| 3. Connection layout | One male thread and two tube ports |
| 4. Total ports | 3 connections |
| 5. Body shape | Compact Y branch |
| 6. Thread gender | Male |
| 7. Thread size | Confirm exact specification before ordering |
| 8. Tube size | Confirm compatible outside diameter |
| 9. Main body material | Engineering polymer with metal threaded base |
| 10. Body color | Black with silver-colored thread |
| 11. Release rings | Push collets with metal retaining rings |
| 12. Service medium | Compressed air |
| 13. Main function | Split one air source into two tube lines |
| 14. Tube connection | Push-to-connect at both outlets |
| 15. Tube release | Press collet after depressurizing |
| 16. Spray gun use | Suitable for compatible spray-gun air systems |
| 17. Compressor use | Suitable for compressor manifolds and accessories |
| 18. Regulator use | Suitable for filters, regulators and valves |
| 19. Industrial use | Light automation and maintenance systems |
| 20. Automotive use | Body-shop and garage pneumatic branches |
| 21. Furniture use | Spray-finishing workshop air distribution |
| 22. Compatible tubing | PU, PE or nylon pneumatic tubing |
| 23. Working pressure | Confirm rating for fitting and tube combination |
| 24. Temperature range | Depends on seals, tubing and environment |
| 25. Airflow | Shared between two branch outlets |
| 26. Pressure behavior | Pressure may drop when both outlets operate |
| 27. Seal type | Internal push seals and threaded seal |
| 28. Thread sealing | Use approved pneumatic sealant where required |
| 29. Installation tool | Use a suitable wrench on the metal hex base |
| 30. Tube preparation | Cut both tube ends squarely and deburr |
| 31. Tube insertion | Push each tube fully to the internal stop |
| 32. Branching benefit | Creates two air paths from one threaded port |
| 33. Space benefit | Compact layout for restricted installations |
| 34. Maintenance benefit | Tubes can be removed without uninstalling the base |
| 35. Reusability | Reusable while threads, seals and collets remain sound |
| 36. Leak prevention | Seal thread and fully insert correctly sized tubes |
| 37. Inspection | Check thread, collets, seals and tube ends |
| 38. Cleaning | Keep ports free from paint, dust and debris |
| 39. Safety | Fully depressurize before installation or tube removal |
| 40. Handling caution | Avoid excessive torque or side loading |
| 41. Damage warning | Replace if cracked, loose or leaking |
| 42. Storage | Store clean and dry |
| 43. Packaging | Bulk or retail packaging available |
| 44. OEM service | Custom thread, tube size and packaging may be available |
| 45. Package contents | 1 x KS-06 male-thread Y splitter |
