| Attribute | Details |
|---|
| 1. Model | KS-04 |
| 2. Product type | Push-in pneumatic tee connector |
| 3. Connection layout | Tube to tube to tube |
| 4. Port quantity | 3 push-in ports |
| 5. Body shape | T-shaped manifold |
| 6. Tube size | Confirm compatible outside diameter |
| 7. Main body material | Engineering polymer with metal retaining components |
| 8. Body color | Black |
| 9. Release rings | Black push collets with metal retaining rings |
| 10. Service medium | Compressed air |
| 11. Main function | Branch or combine pneumatic tubing |
| 12. Tube connection | Push-to-connect at all three ports |
| 13. Tube release | Press the relevant collet after depressurizing |
| 14. Spray gun use | Suitable for compatible spray-gun air tubing |
| 15. Compressor use | Suitable for compressor and manifold tubing |
| 16. Regulator use | Suitable for pneumatic filters and control lines |
| 17. Industrial use | Light automation and maintenance systems |
| 18. Automotive use | Body-shop and garage air-line branching |
| 19. Furniture use | Suitable for spray-finishing workshop air systems |
| 20. Tube material | Use compatible PU, PE or nylon tubing |
| 21. Working pressure | Confirm rating for fitting and tubing |
| 22. Temperature range | Depends on seals, tubing and environment |
| 23. Airflow | Shared according to tube bore and active branches |
| 24. Pressure behavior | Pressure may drop when multiple branches are active |
| 25. Seal type | Internal push-fitting seals |
| 26. Thread requirement | No threaded connection required |
| 27. Installation tool | No wrench normally required |
| 28. Tube preparation | Cut all tube ends squarely and remove burrs |
| 29. Tube insertion | Push each tube fully to the internal stop |
| 30. Branching benefit | Creates two air paths from one line |
| 31. Maintenance benefit | Individual tubes can be released quickly |
| 32. Reusability | Reusable while collets and seals remain serviceable |
| 33. Leak prevention | Use correct tube size and full insertion |
| 34. Inspection | Check all collets, seals and tube ends |
| 35. Cleaning | Keep ports free from paint, dust and debris |
| 36. Safety | Release pressure before tube removal |
| 37. Handling caution | Avoid excessive side load on the branches |
| 38. Damage warning | Replace if cracked, loose or leaking |
| 39. Storage | Store clean and dry |
| 40. Packaging | Bulk or retail packaging available |
| 41. OEM service | Custom tube size and packaging may be available |
| 42. Package contents | 1 x KS-04 push-in tee connector |
