The SK40934 combines a large-capacity paint container with adjustable spraying controls and an integrated work light. Its bright yellow housing, 1400 ml graduated cup, three nozzle assemblies, ergonomic grip, and maintenance accessories make it suitable for frequent DIY, decorating, and workshop coating projects.
1400 ml translucent cup minimizes interruptions for refilling.
Front LED work light improves visibility around edges and dark surfaces.
Three interchangeable nozzle assemblies support varied coating tasks.
Adjustable spray-size dial and trigger-area flow control.
High-visibility yellow and black housing with textured grip areas.
Accessory kit includes funnel, cleaning brush, cleaning needle, seals, and USB cable.
| 1. Product Type | Electric HVLP paint sprayer kit |
|---|---|
| 2. Model | SK40934 |
| 3. Power Method | Corded electric |
| 4. Spray Technology | HVLP-style atomized coating application |
| 5. Construction | Integrated motor, gun, cup, nozzle, and work light |
| 6. Main Color | Yellow |
| 7. Secondary Color | Black |
| 8. Cup Color | Translucent white |
| 9. Housing Material | Impact-resistant engineering plastic |
| 10. Cup Material | Translucent plastic |
| 11. Cup Capacity | 1400 ml |
| 12. Cup Markings | Graduated scale from approximately 200 ml to 1400 ml |
| 13. Paint Feed | Bottom feed |
| 14. Cup Connection | Wide threaded lower connection |
| 15. Nozzle Quantity | Three interchangeable nozzle assemblies shown |
| 16. Nozzle Insert | Metallic spray insert |
| 17. Nozzle Holder | Molded black holder with sealing ring |
| 18. Spray Patterns | Horizontal, vertical, and focused patterns depending on setup |
| 19. Spray-Size Control | Front-side adjustment dial |
| 20. Material Flow Control | Rotary adjustment near the trigger |
| 21. Trigger Type | Large finger-operated trigger |
| 22. Trigger Guard | Integrated guard |
| 23. Handle Design | Ergonomic pistol grip |
| 24. Grip Texture | Black anti-slip inserts |
| 25. Hanging Hook | Top-mounted storage hook |
| 26. Work Light | Front-mounted LED module |
| 27. Light Cable | USB cable shown with accessories |
| 28. Power Cord | Fixed rear-lower cord |
| 29. Battery Requirement | No removable battery required for the sprayer |
| 30. External Compressor | Not required |
| 31. Motor Cooling | Ventilated rear housing |
| 32. Funnel | Included for filling or viscosity checking |
| 33. Cleaning Brush | Included |
| 34. Cleaning Needle | Included |
| 35. Replacement Seals | O-rings shown in accessory set |
| 36. Suitable Coatings | Compatible paints, stains, primers, sealers, and varnishes |
| 37. Water-Based Coatings | Suitable when properly prepared |
| 38. Solvent-Based Coatings | Use only when material compatibility is confirmed |
| 39. Furniture Use | Suitable for tables, chairs, shelves, and panels |
| 40. Cabinet Use | Suitable for cabinet doors and frames |
| 41. Door Use | Suitable for doors, trim, and molding |
| 42. Fence Use | Suitable for compatible stains and outdoor coatings |
| 43. Wall Use | Suitable for small wall sections and touch-ups |
| 44. Craft Use | Suitable for decorative DIY applications |
| 45. Portability | Handheld one-piece construction |
| 46. Cleaning Procedure | Drain, rinse, and flush all fluid passages after use |
| 47. Nozzle Care | Clean nozzle, cap, air passages, and seals after every project |
| 48. Paint Preparation | Strain and thin coating as required |
| 49. Safety Equipment | Eye protection, gloves, protective clothing, and suitable respiratory protection |
| 50. Specification Note | Confirm voltage, wattage, nozzle sizes, output, light data, dimensions, and final accessories before sale |
Furniture, cabinets, doors, trim, fences, garden items, decorative panels, craft work, small wall areas, and general maintenance refinishing.
Important: Unplug the sprayer before filling the cup, replacing nozzles, cleaning, or servicing.



