| Attribute | Details |
|---|
| 1. Product type | Pneumatic dual-action orbital sander |
| 2. Common name | Air palm sander / DA sander |
| 3. Power source | Compressed air |
| 4. Motion | Random orbital / dual-action sanding |
| 5. Pad size category | 5-inch / 125 mm class |
| 6. Form factor | Compact palm-size tool |
| 7. Profile | Low center-of-gravity design |
| 8. Body color | Blue and black |
| 9. Housing construction | Composite exterior with metal drive structure |
| 10. Trigger | Wide top paddle lever |
| 11. Grip | Rounded contoured palm grip |
| 12. Control method | One-hand press operation |
| 13. Speed regulation | Adjustable air-flow knob |
| 14. Air inlet location | Rear of tool |
| 15. Dust outlet location | Rear lower connection |
| 16. Dust extraction | Supports compatible hose or vacuum connection |
| 17. Backing pad | Round low-profile pad |
| 18. Abrasive attachment | Hook-and-loop compatible |
| 19. Abrasive replacement | Quick-change peel-and-press method |
| 20. Surface contact | Stable circular contact area |
| 21. Handling balance | Centered over the pad for controlled movement |
| 22. Operator reach | Suitable for broad panels and gently contoured parts |
| 23. Automotive use | Panel sanding, primer prep and body filler finishing |
| 24. Paint-shop use | Scuffing and surface leveling before coating |
| 25. Wood use | Furniture, cabinet, door and board finishing |
| 26. Metal use | Light blending, oxide removal and coating preparation |
| 27. Composite use | Suitable for controlled finishing of compatible panels |
| 28. Repair use | Spot repair and general refinishing preparation |
| 29. Production use | Repeat surface-preparation tasks on workshop lines |
| 30. Abrasive grit range | Use coarse, medium or fine discs according to the job |
| 31. Finish character | Uniform sanding pattern suitable for subsequent processes |
| 32. Dust-control function | Helps direct sanding residue toward an extraction system |
| 33. Work orientation | Horizontal, vertical or overhead where safe and practical |
| 34. Portability | Compact for workstation-to-workstation use |
| 35. User group | Body-shop technicians, woodworkers and maintenance teams |
| 36. Work setting | Garage, factory, repair shop and furniture workshop |
| 37. Air preparation | Filtered, dry and regulated compressed air recommended |
| 38. Air connection | Use a secure fitting matched to the local hose standard |
| 39. Lubrication care | Apply suitable pneumatic-tool lubricant as required |
| 40. Pad care | Keep the hook surface clean for reliable disc holding |
| 41. Port care | Inspect and clear the dust outlet regularly |
| 42. Pre-start check | Inspect the lever, pad, fittings and hoses before use |
| 43. Safety equipment | Use eye, hearing and respiratory protection |
| 44. Service safety | Disconnect the air supply before adjustment or disc replacement |
| 45. Storage | Store indoors in a clean and dry condition |
| 46. Main advantage | Low-profile control for versatile professional finishing |
