| Attribute | Details |
|---|
| 1. Model | CS-10PCS |
| 2. Product type | Spray-gun paint filter strainer set |
| 3. Set quantity | 10 pieces |
| 4. Primary function | Filter coating material before it enters the spray gun |
| 5. Main application | Gravity-feed spray-gun paint filtration |
| 6. Compatible equipment | Compatible spray guns and paint-cup fluid inlets |
| 7. Housing material | Clear or translucent molded plastic |
| 8. Filter element | Internal mesh strainer |
| 9. Housing color | Clear or white as shown |
| 10. Internal color variation | Mixed visible tones may occur as shown |
| 11. Filter shape | Compact cylindrical body with narrow stem |
| 12. Installation position | Between compatible paint cup and fluid passage |
| 13. Filtration target | Dirt, dried paint fragments and loose particles |
| 14. Spray benefit | Helps reduce nozzle blockage from large contaminants |
| 15. Finish benefit | Supports cleaner coating delivery when correctly used |
| 16. Maintenance benefit | Helps limit debris entering internal fluid passages |
| 17. Paint compatibility | Use only with coatings compatible with the plastic and mesh |
| 18. Solvent compatibility | Confirm before use with strong thinners or cleaners |
| 19. Water-based coating use | Subject to confirmed filter and spray-gun compatibility |
| 20. Solvent-based coating use | Subject to confirmed material compatibility |
| 21. Mesh specification | Confirm mesh grade for the selected production version |
| 22. Overall dimensions | Confirm fit dimensions before bulk ordering |
| 23. Stem diameter | Must match the compatible spray-gun inlet |
| 24. Fit type | Push-in filter for compatible equipment |
| 25. Installation method | Insert gently without forcing or deforming the filter |
| 26. Removal method | Remove carefully after emptying and depressurizing equipment |
| 27. Usage format | Replaceable consumable accessory |
| 28. Reusability | Depends on coating type, condition and cleaning compatibility |
| 29. Replacement timing | Replace when clogged, damaged or difficult to clean |
| 30. Inspection | Check the mesh and housing before each use |
| 31. Cleaning | Use only an approved cleaner suitable for the coating and plastic |
| 32. Drying | Allow fully cleaned filters to dry before reuse where applicable |
| 33. Automotive use | Vehicle refinishing and body-shop spraying |
| 34. Furniture use | Wood, cabinet and furniture coating |
| 35. Industrial use | Light production and maintenance painting |
| 36. Hobby use | Craft, model and DIY spray-painting projects |
| 37. User level | Suitable for professional and experienced DIY users |
| 38. Safety | Wear appropriate gloves, eye protection and respiratory protection |
| 39. Equipment preparation | Empty the cup and isolate the air supply before installation |
| 40. Damage warning | Do not use filters with torn mesh or cracked housings |
| 41. Storage | Keep clean, dry and protected from dust and deformation |
| 42. Packaging type | Retail blister card |
| 43. Display feature | Hanging slot for retail merchandising |
| 44. Package appearance | Blue backing card with clear blister as shown |
| 45. OEM service | Custom quantity, packaging and branding may be available |
| 46. Package contents | 10 x spray-gun paint filter strainers |
